Which of the following statements applies when heating a bearing with a torch during the removal process?
a. Never use a propane torch.
b. Use an aluminum ring for a heat sink.
c. Cool the bearing with a wet cloth as soon as it is removed.
d. Do not reuse a bearing removed this way.
d
You might also like to view...
What type of specialty valve is normally a very small stop valve?
A. diaphragm B. solenoid C. tempering D. relief
Any linear two-terminal network can be replaced by an equivalent network that consists of a voltage source, called the __________voltage source
A. open circuit B. Thevenin C. superposition D. maximum power transfer
Heat pump A has a SEER rating of 16 and an HSPF rating of 7 Heat pump B has a SEER rating of 14 and an HSPF rating of 9. Which heat pump heats more efficiently?
A) Heat pump A B) Heat pump B C) They are about the same heating efficiency by the time both the SEER and HSPF are considered D) Neither the SEER nor the HSPF can determine which heat pump heats more efficiently
When using the Tape Measure tool to resize a group or component, why must the group or component be opened for editing before Tape Measure is used?
What will be an ideal response?