What are the benefits in using a fate rate method of pricing to the customer?
What will be an ideal response?
Allows for accurate & consistent estimates.
The customer knows up front the cost and can make an informed decision as to OK the work or not.
You might also like to view...
Cuando se combina el gas acetileno con oxígeno durante actividades de corte oxigás, el acetileno hace que la llama arda a más de _____ grados Fahrenheit.
a. 2,500 b. 3,500 c. 4,500 d. 5,500
Find a 90% confidence interval for the difference in mean breaking strength between the two types of yarn.
A sample of 125 pieces of yarn had mean breaking strength 6.1 N and standard deviation 0.7 N. A new batch of yarn was made, using new raw materials from a different vendor. In a sample of 75 pieces of yarn from the new batch, the mean breaking strength was 5.8 N and the standard deviation was 1.0 N.
After a TP sensor has been tested using the MIN/MAX function on a DMM, a reading of 5 volts is displayed. What does this reading indicate?
A) The TP sensor is open at one point during the test. B) The TP sensor signal is shorted to 5-volt reference. C) The TP sensor is shorted. D) Both B and C are possible.
The vacuum level on a system being evacuated pulls down to 2,000 microns, but goes no lower even as the vacuum pump continues to run. This indicates:
A) That the system is charged with the wrong type of refrigerant. B) The presence of water in the system. C) That the vacuum is complete. D) That the refrigeration oil is incompatible with the refrigerant in the system.