________ protocol defines the source and destination address of the originating and terminating devices in the overhead of the frame and then relies on each intermediate device to route the packet to the correct destination
Fill in the blank(s) with correct word
connectionless
You might also like to view...
According to NEC Article 424, radiant heating panels installed in concrete or poured masonry must not exceed _____.
a. 16W/ft2 of heated area b. 25W/ft2 of heated area c. 33W/ft2 of heated area d. 43W/ft2 of heated area
If you were asked to invest $2500.00 in a piece of equipment that you would charge the customer $75.00 each time the equipment was used and it was expected be use 100 times per year, what would be the expected ROI %?
A) 33 1/3% B) 300% C) 99% D) 200%
Which of the following should never be worn by someone applying chemicals?
a. rubber gloves c. leather shoes b. safety goggles d. respirator
When a rig has a problem, the driver should troubleshoot the problem and then
A. fix it to the best of his or her ability and drive to the nearest mechanic B. make the best guess about what is causing the problem and report it to the company C. contact a mechanic and describe all information about the problem D. repeat troubleshooting until the problem is solved