An alternate removed section ____.
A. needs to be properly labeled with the cutting plane label
B. should be shown at the same scale as the part from which it came
C. can be rotated around its own centerline and shown on the centerline outside the part
D. both a and c
E. none of the above
Answer: C
You might also like to view...
Lea Ann has plants between her house and the walk. The area is rectangular in shape, 6 feet wide and 62 feet long. In the back lawn, she has an elliptical bed with axes 14 feet and 18 feet and a birdbath in the center. She filled the beds with 9 inches of topsoil.
a. How many cubic yards of topsoil were needed to fill the rectangular
bed?
b. How many cubic yards of topsoil were needed to fill the elliptical
bed? Use the formula, A = ?SL, times the depth.
c. How many total cubic yards of topsoil were needed?
d. How many feet of edging were needed to enclose the elliptical
bed? Use the formula 
An automatic transmission is operating with an internal hydraulic pressure of 1387 kPa. If this pressure is acting against an 8.75 cm diameter piston, what force will be developed?
Fill in the blank(s) with the appropriate word(s).
Most automotive engines are _____cycle engines.
A. two-stroke B. four-stroke C. six-stroke D. eight-stroke
What opens and closes the valves in a reciprocating compressor?
A) Pressure difference across the valves B) Hydraulic valve lifters C) A cam shaft D) The piston pushes them open.