Technician Asays testing with a voltmeter can determine the voltage drop across the headlights. Technician B says a voltmeter can determine if excessive resistance is in the circuit. Who is correct?
A. Technician A only
B. Technician B only
C. Both Technician A and B
D. Neither Technician A nor B
Answer: C
You might also like to view...
All of the following should be observed carefully when checking bearings except ________.
A) Bearing should be lightly oiled before checking. B) A bearing is checked by rotating it feel and listen for roughness C) A rough bearing should be cleaned, dried, and rechecked D) Bearings should be air-dried by spinning them with compressed air
What could happen if the meter leads were connected to the positive and negative terminals of the battery while the meter and leads were set to read amperes?
A) Would read volts instead of amperes B) Would display OL C) Would display 0.00 D) Could blow an internal fuse or damage the meter
Braking while moving through a curve increases the _____ on a rig.
Fill in the blank(s) with the appropriate word(s).
Express 7 feet 5 5/8 inches in inches.
What will be an ideal response?