The weep hole on a water pump is located where?
A) Between the bearing and the engine B) Between the impeller and the seal
C) Between the seal and the bearing D) Any of the above, depending on engine
C
You might also like to view...
The transfer case shift lever of a 4WD vehicle is locked in 4H. Technician A says this can be caused by poor driving habits. Technician B says that driving in the opposite direction can often free the shift lever. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician
A balancing factor is a formula used to determine what percentage of the reciprocating weight needs to be included in the bob weight. This is usually ________
A) 20% B) 10% C) 50% D) 40%
During the decay phase, the voltage across the inductor is greatly limited because of the presence of _______________
A. resistance B. magnetic forces C. short circuits D. capacitors
A cut which uses a bevel angle and a miter angle at the same time is called a ________
A) Coping cut B) Double cut C) Mitered cut D) Compound cut