A welding symbol that appears below the reference line consists of a right triangle with one of the sides touching the reference line. To the left of the triangle is the notation 3/4. To the right of the triangle is the notation 10-16. What does this symbol signify?
A. Intermittent fillet welds, 10" long with 3/4" leg lengths, are to be placed on the arrow side with a distance of 6" in between each one, or a 16" pitch.
B. Intermittent fillet welds, 10" long with 3/4" leg lengths, are to be placed on the arrow side with a distance of 16" in between each one.
C. 10 intermittent fillet welds, each with 3/4" leg lengths, are to be placed on the arrow side with a distance of 16" in between each one.
D. 16 intermittent fillet welds, each with 3/4" leg lengths, are to be placed on the arrow side with a distance of 10" in between each one.
E. None of the above. This is an incorrect symbol.
Answer: A
You might also like to view...
Cup depths for brazing are _____ cup depths used for soldering.
a. deeper than b. shallower than c. the same as d. not measured, unlike
Data communication is as dependent upon the rules defined by the OSI model as it is upon the circuits used to connect the devices
Indicate whether the statement is true or false
When calculating the service requirement for a particular building, the first step is to _____.
a. apply any demand factors b. calculate the total motor load c. determine all continuous loads d. determine the floor area of the building
Who is the person that greets the service customer and completes the work order?
A) Service manager B) Service advisor C) Service writer D) Either B or C