What is the difference between input bias currents?
A) bias current differential B) slew rate
C) input current D) input offset current
D
You might also like to view...
The Acceptance Criteria for Bend Test requires that the sum of the greatest dimensions of all indications on the surface which exceed 1/32 in. (0.8 mm) but are less than or equal to 1/8 in. (3.2 mm) shall not exceed _____ in.
A. 1/8 B. 2/8 C. 3/8 D. 4/8
Steam exiting the turbine of a power plant passes through the insulated shell-andtube heat exchanger condenser. The mass flow rate of the steam is 145 kg/s, and the steam enters the heat exchanger as a saturated mixture with a quality of 0.95 at 20 kPa. The steam exits the condenser as a saturated liquid at 20 kPa. Liquid cooling water is used to condense the steam. The cooling water enters the condenser at 10oC.
(a) Determine the exit temperature of the liquid cooling water if the mass flow rate is 4000 kg/s. (b) Using your heat exchanger model, plot the cooling water mass flow rate and volumetric flow rate (entering the condenser) for exit temperatures ranging from 15oC to 55oC. (c) If the exit temperature of the cooling water is regulated such that it must be no greater than 40oC, and if the cooling water flow rate through the condenser can be adjusted in a range from 500 kg/s to 2000 kg/s, what is the range of maximum possible flow rates of steam through the condenser? Given: P1 = 20 kPa; x1 = 0.95; m?s = 145 kg/s; P2 = 20 kPa; x2 = 0 T3 = 10oC, m?cw = 4000 kg/s Assume: Q? = 0 (insulated). Also, given no other information regarding the heat exchanger, make the following common heat exchanger assumptions: W? = ?KE = ?PE = 0 Also, assume the heat exchanger is a multiple-inlet, multiple-outlet, steady-state, steady-flow device. What will be an ideal response?
All of the following are characteristics of a value-added tax system, except:
(a) Value-added taxes are taxes on consumption (b) The end user pays value-added taxes (c) Value-added taxes are charged at each stage of product development (d ) Value-added taxes are charged only on the raw materials for product development
Because projected economic conditions and stability of employment in a given area are subject to change, these considerations are of little value in researching the market being evaluated as a possible location for starting a new business
A. True B. False