Water-cooled condensers using sea water are usually piped to permit periodic cleaning by ____.
A. brushing the tubes
B. acid treatment
C. back finishing
D. all of the above
Answer: D
You might also like to view...
The spark created by the ignition system must be delivered to the correct spark plug at a specified point after top dead center (TDC).
Answer the following statement true (T) or false (F)
Answer the following statement(s) true (T) or false (F)
1. The total amount of current flowing into a junction must equal the current coming out. 2. To apply Kirchhoff’s current law, we arbitrarily assign negative direction to currents flowing into the junction and positive direction to currents coming out of the junction. 3. The word load refers to any device that draws voltage from the current divider. 4. A small resistance is a small load and a large resistance represents a large load. 5. The bleeder is defined as that portion of the voltage divider that is connected perpendicular to the load.
With a 2" tread thickness, how much will a stringer drop when installed on subflooring with 1/2" finish flooring to be applied after the staircase construction?
A) 1 1/2" B) 2" C) 1" D) 2 1/2"
The change in direction of the cutting plane line is less than 90° in an aligned section.
Answer the following statement true (T) or false (F)