The best way to adjust a CPR valve is by ____.
A. adjusting the low pressure control
B. measuring the temperature drop of the air through the evaporator
C. adjusting the CPR to produce an amperage draw of the compressor motor to the motor nameplate rating plus 10%
D. adjusting the CPR to produce an amperage draw of the compressor motor to the motor nameplate rating plus 25%
Answer: C
You might also like to view...
What kind of symbol is shown in Figure 3?
a. Basic surface texture symbol
b. Material removal prohibited
c. Material removal by machining is required
d. Material removal by any method desired
e. None of the above
Object dropped on the floor should not be used again until they are thoroughly:
What will be an ideal response?
The EGR monitor is an intrusive test, and the customer may notice an rpm fluctuation while the test is taking place.
Answer the following statement true (T) or false (F)
The ampere-hour rating of a battery is defined as the:
A) number of amperes supplied over the number of hours at a given current. B) number of hours per amperes supplied. C) number of amperes supplied in 1 hour. D) all of these.