________________ is the distortion of a part after removal of forces applied during manufacture.
Fill in the blank(s) with the appropriate word(s).
Free state variation
You might also like to view...
Standard inch construction modules are ____.
A. 6", 12", and 18" B. 12", 16", and 24" C. 16", 20", and 24" D. 20", 24", and 28"
In choosing material for a girder, the green designer may see some benefits in using ____ instead of built-up lumber girders or steel girders.
A. PVC B. LVL C. plywood D. cast iron
NREL wind power resource maps classify every region in the US by Wind Power Class, ranging from ____, based on the average annual wind speed at heights of 33 ft and 164 ft above the ground.
A. 1 (poor) to 7 (superb) B. 1 (poor) to 10 (superb) C. 1 (poor) to 50 (superb) D. 1 (poor) to 100 (superb)
Which of the following pulls requires the length of the box to be no less than eight times the trade diameter of
the largest raceway? A) Straight pull B) Angle pull C) U pull D) Circle pull