For air conditioners, a rise in the return air wet bulb temperature causes:

A) A decrease in compressor amp draw.
B) An increase in the temperature difference across the evaporator coil.
C) A decrease in suction pressure.
D) A decrease in the temperature difference across the evaporator coil.


D

Trades & Technology

You might also like to view...

Using the Ohm's law formula, how is amperage calculated?

A. voltage multiplied by resistance B. voltage divided by current C. resistance divided by voltage D. voltage divided by resistance

Trades & Technology

Write the equations required to express the moment along the entire length of beam in Figure P5.6. Use an origin at point A, and then repeat computations using an origin at point D. Verify that both procedures give the same value of moment at point C.

Trades & Technology

In ladder diagrams, component symbols are placed:

A) By their function in the circuit. B) By their actual physical location in the unit. C) Only at the intersection points. D) In sequential order according to each component's model number.

Trades & Technology

How many additional conductors (wires) must be deducted from a box that contains a maximum number of

eight No. 12 wires and two spliced conductors? A) 1 B) 2 C) 3 D) 4

Trades & Technology