Technician A says that hard spots in a brake drum should be removed using a carbide-tip machining tool. Technician B says that the drum should be replaced if hard spots are discovered. Which technician is correct?
A) Technician A only B) Technician B only
C) Both technicians A and B D) Neither technician A nor B
B
You might also like to view...
There are three main tests used to measure ground resistance. One of these is the ____.
a. Wenner five-point test b. Hall generator test c. four-point fall-of-potential test d. clamp-on ground resistance test
The fan arrangement is
a. lopsided c. one sided b. two sided d. five sided
Which of the following is not true regarding flatness?
A. It differs from straightness. B. The term flatness is interchangeable with the term straightness. C. When flatness is the feature control, a datum reference is neither required nor proper. D. Flatness is specified when size tolerances alone are not sufficient to control the form and quality of the surface.
After the supplier's invoice is received, which documents are needed to approve payment?
A) the purchase order and the receiving report B) the approved budget and the purchase order C) the purchase order and the invoice D) the bill of lading and the receiving report E) Approval can be made from the purchase order.