Gibs or dowels on a pillow block housing are there for the purpose of _____
a. tensioning the bearing
b. aligning the bearing
c. lubricating the bearing
d. matching the cap and base
d
You might also like to view...
A wind turbine __________ (can/cannot) capture all of the available wind power.
Fill in the blank(s) with the appropriate word(s).
?Using the Table of Block Thicknesses for a Metric Gage Block Set, determine a combination of gage blocks for a dimension of 53.42 mm.
What will be an ideal response?
Answer the following statement(s) true (T) or false (F)
1. The Bipolar Junction Transistor (BJT) is a three-terminal device similar in composition to the vacuum tube triode. 2. Silicon transistors have almost totally replaced germanium transistors in electronic applications. 3. Both the NPN and PNP transistors have two depletion regions created during the manufacturing process. 4. The concept of forward biased and reversed bias do not apply to the testing of a transistor. 5. The setting/socket method for transistor testing is really a “ballpark” approach because many transistors will read much lower than the manufacturer’s specs but still work fine.
The capacity of a pump is the _____
a. highest pressure the pump can handle b. amount of fluid that the pump can move in one minute c. amount of fluid the pump holds when it is not working d. number of hours the pump can work without wearing out