Three 440-volt generators, form a delta connected source which is connected to a balanced delta connected load of Z? = (8.66 + j5) ? per phase as shown in Fig. 12.52. Determine the value of I?? and Ia?. What is the pf of the load?
 figure 1.png)
 ANSWER.png)
You might also like to view...
Which of the following is the least likely cause for a transmission not upshifting and only operating in first gear?
A. Improper fluid level or condition B. Faulty valve body C. Defective oil pump D. Faulty Throttle Position (TP) sensor
?What problem might be caused if the root opening is larger than normal?
A. ?More filler metal will be needed and the heat-affected zone will be larger. B. ?You might have to use a higher amperage setting to melt both sides of the root to get good fusion. C. ?Using a very short arc will help solve the problem. D. ?Nothing if you are a good welder and can fill the larger gap.
List what takes place during the "Reception" step in the Repair Process
What will be an ideal response?
In a CMU wall, control joints replace _____ every 20 feet or so.