What are the requirements for pneumatic tools that operate at pressures in excess of 100 pounds per square inch?
What will be an ideal response?
Pneumatic tools that operate at pressures in excess of 100 pounds per square inch and that shoot fasteners (nails, staples, etc.) must be equipped with a special protective device to prevent the ejection of fasteners when the muzzle of the tool is anywhere except pressed against the work surface.
You might also like to view...
Lap joints are commonly used to join structural shapes such as a(n) ____.
A. angle iron B. ship's frame C. channel iron D. channel frame
The coping on a masonry fence wall is generally
A) sloped toward the outside. B) sloped toward the interior. C) sloped on both sides. D) A, B, or C. E) dead flat.
_____________________ desoldering units remove all of the solder in one operation, leaving the hole free and clean of solder without the leads resweating to the sides of the holes.
Fill in the blank(s) with the appropriate word(s).
When determining a ration, the _____ must be considered when determining the nutrient requirements
a. weight of the ration c. size of the ration b. type of the ration d. functions of the ration