Technician A says that charging system testing requires that the battery be at least 75% charged. Technician B says that a digital multimeter can not be used to test charging system voltage. Who is right?
A) A only
B) B only
C) Both A and B
D) Neither A nor B
A
You might also like to view...
Why does the fuel pressure on a typical return type port fuel injection system increase when you snap the throttle?
A.The manifold pressure goes up, and to maintain a constant pressure drop across the injector, the fuel must increase as well.
b.As the manifold pressure goes down, the fuel pressure must increase the pressure drop across the injector,
c.None of these.
d.As the manifold pressure goes up, the fuel pressure must increase, to decrease the pressure drop across the injector.
What is the rotor speed for the single-phase, two-pole synchronous clock motor when operated from a 60-Hz source?
What will be an ideal response?
The BtuH loss of an outside concrete wall that is 100' long and 12' high that has no windows or doors in it is______ (Assume a TD of 62°F.)
Fill in the blank(s) with the appropriate word(s).
Technician A says that it is recommended that the vehicle be driven less than 50 mph for the first 50 miles to allow the tire to adhere to the wheel. Technician B says that sudden hard acceleration with newly mounted tires can cause the tire to change position on the wheel. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician