The ratio between the pinion and ring gears is about 8:1.
Answer the following statement true (T) or false (F)
False
You might also like to view...
The traffic on the design lane of a proposed four-lane rural interstate highway consists of 40% trucks. If classification studies have shown that the truck factor can be taken as 0.45, design a suitable flexible pavement using the 1993 AASHTO procedure if the AADT on the design lane during the first year of operation is 1000, The pavement structure will be exposed to moisture levels approaching saturation 20% of the time, and it will take about one week for drainage of water. Effective CBR of the subgrade material is 7. CBR of the base and subbase are 70 and 22, respectively, and Mr for the asphalt mixture, 450,000 lb/in2.
pi = 4.2, and pt = 2.5. Growth rate = 4% Design life = 20 years Reliability level = 95% Standard deviation = 0.45 What will be an ideal response?
Technician A says that with? self-adjusting clutch? systems, the release bearing constantly rotates. Technician B says the ball bearing portion of the release bearing should be lubricated with high temperature grease during routine maintenance. Which technician is? correct?
A) Technician A only
B) Technician B only
C) Both technicians A and B
D) Neither technician A nor B
Adding a bow to an arrangement _____
A) adds interest to the arrangement B) adds a pleasing accent C) lends a graceful touch to the design D) all of the above
What is the range of normal operating temperatures for an Allison hydromechanical transmission?
A. 120 - 160 degrees F (50 - 70 C) B. 160 - 200 degrees F (70 - 93 C) C. 200 - 240 degrees F (93 - 116 C) D. 240 - 270 degrees F (116 - 132 C)