Explain why a 14 AWG Type NM cable is not permitted to be used for a spa or hot tub.
What will be an ideal response?
It has a 14 AWG equipment-grounding conductor and the minimum size permitted is 12 AWG.
You might also like to view...
Which of the following would not typically affect crane stability during a lift?
a. Accuracy of the load’s weight information b. Buoyancy effects for submerged lifts c. New wire rope on the main hoist drum d. Shifting of the load center of gravity (CG) during the lif
Technician A says to flat file the surface of a warped valve body, to allow it to seal properly helping to prevent unwanted, partial engagement of a clutch or band. Technician B says valves sticking in their bore may be the result of overtorquing the hold-down bolts of the valve body. Who is correct?
A. A only B. B only C. Both A and B D. Neither A nor B
All snakes are carnivorous
Indicate whether the statement is true or false
The subsequent problems deal with the circuit below where the preset and clear features operate based on positive logic (i.e., they are "active high"), which is not the standard convention.
Note: Each question is independent and doesn't depend on results from previous questions. The only values known initially are the values provided in each question.When L=0, C=1, and R changes from 0 to 1, the output X
A. becomes (or remains) 0 B. remains unchanged (regardless of whether the initial value is 0 or 1) C. toggles regardless of its value D. is uncertain E. becomes (or remains) 1