The minimum NEC® lighting load requirement for the home in the figure above is _____ VA





A) 3,000

B) 3,600

C) 4,500

D) 6,000


Answer: B

Trades & Technology

You might also like to view...

The second stage of drawing sections is to ____.

A. evaluate the needs B. determine limits C. verify scope D. lay out the section

Trades & Technology

High impedance voltmeters can indicate some amount of voltage caused by the capacitance of the ground and induced voltage produced by surrounding magnetic fields. These are generally referred to as ____________________ voltages.

Fill in the blank(s) with the appropriate word(s).

Trades & Technology

This DMM is set to read ohms. The reading shown means __________

A) A faulty meter display B) Zero resistance C) Insufficient information D) An open circuit

Trades & Technology

To turn off an IGBT, a __________ voltage is applied to the gate.

A. negative B. positive C. either A or B

Trades & Technology