In the past, ____________________ was only permitted to be installed in motion picture and television studios.

Fill in the blank(s) with the appropriate word(s).


technical power

Trades & Technology

You might also like to view...

Three holes are drilled on a horizontal line in a housing.  The center distance between the first hole and the second hole is 201.25 millimeters, and center distance between the first hole and the third hole is 285.15 millimeters.  What is the distance between the second hole and the third hole?

What will be an ideal response?

Trades & Technology

What system in the plant allows water to move up and down the stem?

a. reproductive system c. roots b. leaves d. vascular system

Trades & Technology

(a) A two-story hospital facility shown in Figure P2.18 is being designed in New York with a basic wind speed of 90 mi/h and wind exposure D. The importance factor I is 1.15 and K z = 1.0. Use the simplified procedure to determine the design wind load, base shear, and building overturning moment. (b) Use the equivalent lateral force procedure to determine the seismic base shear and overturning moment. The facility, with an average weight of 90 lb/ft 2 for both the floor and roof, is to be designed for the following seismic factors: S DS = 0.27g and S D1 = 0.06g; reinforced concrete frames with an R value of 8 are to be used. The importance factor I is 1.5. (c) Do wind forces or seismic forces govern the strength design of the building?

Trades & Technology

The combined weight of a building's structure and its foundation make up its _____

a. dynamic load b. ground load c. static load d. total load

Trades & Technology