Name and briefly describe the type of sawing used for lumber in most construction.
What will be an ideal response?
Most lumber used for construction purposes is plain-sawed. This method produces the maximum yield and the widest stock from the log. Plain sawed lumber produces boards that have a broad grain running their length.
You might also like to view...
Define seed blend
What will be an ideal response?
PROBLEM 3.120 A torque T applied to a solid rod made of an elastoplastic material is increased until the rod is fully plastic and them removed. (a) Show that the distribution of residual shearing stresses is as represented in the figure. (b) Determine the magnitude of the torque due to the stresses acting on the portion of the rod located within a circle of radius c0.
Technician A says to install press-fit ball joints using a hammer on the ball joint housing to seat the ball joint in the control arm. Technician B says that a tool resembling a large C-clamp should be used to press ball joints in and out. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians A and B D) Neither technician A nor B
The output v? of the op amp circuit of Fig. 6.92(a) is shown in Fig. 6.92(b). Let Ri = Rf = 1 M? and C = 1 ?F. Determine the input voltage waveform and sketch it.
 FIGURE 1.png)