When laying out fire hose to be service tested, test lengths should be:
A. no more than 150 feet.
B. no more than 300 feet.
C. no more than 500 feet.
D.no more than 200 feet.
Answer: B. no more than 300 feet.
You might also like to view...
Describe the most common method of harvesting hay
What will be an ideal response?
On newer engines the designers try to place the top piston ring as close to the top of the piston as possible. The reason for this is ________
A) To reduce the cost of the piston B) To raise the compression ratio C) To protect the second piston ring D) To reduce HC emissions
What is an advantage of a crossflow tower?
A) A cross flow tower can be configured for a lower height. B) Cross flow cooling towers can employ ECM blower motors. C) Cross flow cooling towers have variable-pitch air inlet vanes to provide more efficient airflow through the tower. D) The discharge air can be ducted into conditioned space in the winter to provide free heat and humidification.
To ensure the welding current will not pass through seals, bearings, or other contacting surfaces that could
be damaged from arcing, make sure to correctly position the _____. a. electrode b. air hose c. workpiece clamp d. arc torch