Sketch a simple hydraulic circuit using ANSI symbols that include the following: reservoir, pump, pressure relief valve, four-way, two-position solenoid valve, double acting cylinder, and spring loaded accumulator. The four-way, two-position, solenoid valve will be used to reverse the direction of travel for the double acting cylinder and the accumulator will insure the cylinder does not creep once in the extended position. The pressure relief valve will ensure the system does not exceed application requirements. Note: Addition of a check valve above the pump as shown in the circuit below will ensure that the double acting cylinder will not creep even with the loss of pump output.
What will be an ideal response?
Trades & Technology
You might also like to view...
An adapter cable containing one male plug and two female cord connectors used to join two loads to one branch circuit is referred to as a ____.
A. branch-off B. bonder C. two-fer D. split branch
Trades & Technology
The best wrench to use when loosening a bleeder screw is a/an:
A. 12 point socket B. open end wrench C. six point bleeder valve wrench D. line wrench
Trades & Technology
What are the two main types of pneumatic control valves?
What will be an ideal response?
Trades & Technology
When practicing horizontal V-groove welds, pay particular attention at the termination of the weld to fill the
_____. a. pad b. root c. crater d. puddle
Trades & Technology