When using an epoxy anchoring system, _____.
a. tighten the fastener nut to secure the component before the epoxy sets
b. always use a wire brush to clean the prepared hole
c. the epoxy should be striped rather than uniform in color
d. use an anchor screen in hollow wall or brick
d. use an anchor screen in hollow wall or brick
You might also like to view...
Which of the following readings may indicate a problem when detecting neutral overloading in a receptacle branch circuit by measuring the neutral-to-ground voltage?
a. 10V or less b. higher than 2V c. less than 2V d. the load changing voltage across the circuit
When troubleshooting an electronic problem on a current diesel engine, which of the following should be the most reliable source of the most recent OEM information?
A. CD-ROM B. DSM C. DVD-ROM D. SIS
At the ____ point, air is completely saturated with moisture.
a.dew b.condensation c.freezing d.boiling
A eutectic solution is a(n) ____.
A. phase change solution B. very warm solution C. acid solution D. explosive solution