Adhesive on flexible foam insulation should be applied _____.

a. as a 1?8" (3 mm) bead
b. on one surface only
c. only above 50°F (10°C).
d. as a thin layer on both surfaces


d. as a thin layer on both surfaces

Trades & Technology

You might also like to view...

While diagnosing an A/C concern the scan tool reads "Inside Air Temp = 90°" and "Ambient Temp = -38°". Shop temperature is 87°. What should the technician do?

A) Replace the ambient sensor B) Clean the inside air temperature sensor C) Check the ambient sensor and connections D) Move the vehicle outside to warm it up

Trades & Technology

The dimension limit for an object are  .  Find the tolerance for this dimension in inches.

What will be an ideal response?

Trades & Technology

On a vertical spindle machining center, positive axis motion occurs as the spindle moves down toward the table

Indicate whether the statement is true or false

Trades & Technology

The high-temperature limit switch mounted above or beside the heat exchanger of a gas furnace should

cycle open if _____. a. a flame rollout occurs b. the outdoor temperature exceeds 75°F c. there is insufficient combustion air d. the blower fails to operate

Trades & Technology