A suspension mount bolt hole has become enlarged in a frame due to shear forces. What should be done?

A. replace the frame
B. drill oversize to the next bolt size up
C. ream oversize to the next bolt size up
D. grind a taper on the bolt and drive in


Answer: C

Trades & Technology

You might also like to view...

Storm drain openings are required to be ____________________ unless openings are located in areas normally approved for vent terminals

Fill in the blank(s) with the appropriate word(s).

Trades & Technology

All of the following can cause soil acidity EXCEPT ____

a. acidic parent materials b. rainfall c. growing and harvesting crops d. fertilizing agricultural fields

Trades & Technology

Most diesel fuel is what grade?

A) Grade #1 B) Grade #2 C) Grade #3 D) Grade #4

Trades & Technology

If you must make an emergency stop, you should brake so you:

a. Can steer hard while braking hard. b. Use the hand brake first. c. Can steer and keep your vehicle in a straight line.

Trades & Technology