Technician A says that the pattern width should be set to the size of the part being painted. Technician B says that the pattern control knob should be set at fully open at all times. Who is correct?
A. Technician A only
B. Technician B only
C. Both Technicians A and B
D. Neither Technician A nor B
A. Technician A only
You might also like to view...
The Ford eCVT transmission is similar to the Toyota power-split EXCEPT that ________.
A) The motors are placed one above the other B) It uses automatic transmission fluid C) It uses only one motor D) None of these
The term that is MOST-Likely to be used to describe the number of degrees of crankshaft rotation that occurs while both the intake and exhaust valves are open at the same time is:
A. valve overlap B. backlash C. zero-lap D. end thrust
What is the resultant capacitance?
A piezoelectric crystal has a dimension of 
Its thickness is 1.25mm. It is held between two electrodes for measuring the change of force across the crystal. Young’s modulus of the crystal is 
charge sensitivity is 110 pc/N, and permittivity is 1200. The connecting cable has a capacitance of 250pF and the oscilloscope for display has a capacitance of 40pF.
Where,
What will be an ideal response?
If you know that a battery has become sulfated after a long period of inactivity and you want to save it, which of the following methods would be most likely to succeed?
A. replace the electrolyte with fresh B. high charge for 24 hours C. trickle charge for 2 days D. connect in parallel with a known good battery then fast charge