In the ____ method of placing and reading dimensions, each dimension is placed in line with the dimension to which it refers.
A. symmetric
B. linear
C. aligned
D. directional
Answer: C
You might also like to view...
When an appliance is _____________ vented, fresh air is brought straight to the unit through a pipe that runs from outside the building to the combustion chamber of the appliance.
a. direct b. power c. mechanical d. induced
All of the following statements are true EXCEPT:
A. it is sometimes necessary to remove exhaust pipes before the transmission can be removed. B. before the transmission can be removed, the driveshaft must be removed. C. on an RWD vehicle, to gain easier access to the nuts that hold a shifter handle in place, remove the cross-member bolts. D. sometimes heat is needed to expand a gear during disassembly or reassembly. The tool of choice for this is a torch rather than a heat gun, which can damage a gear if it is overheated.
After repairing a system that has had an electrical motor failure (compressor burnout), it is good field practice to re-use the recovered refrigerant in that system.
Answer the following statement true (T) or false (F)
Fast-track construction is generally considered an economical way to design and erect steel-frame buildings. How is this economy achieved?
What will be an ideal response?