An object is sketched in isometric by positioning it so that the part seems to rest on ____.
A. the front face
B. one corner
C. the back face
D. its top
Answer: B
You might also like to view...
A controlled amount of water and additives are then fed into the mixer and each batch is mixed for _____ .
A. 2 to 3 minutes B. 5 to 7 minutes C. 6 to 8 minutes D. 10 to 12 minutes
What term describes the transfer of heat through the circulation or movement of a liquid or a gas?
A) Conduction B) Convection C) Radiation D) Calorie
Very large air-conditioning loads are normally handled by:
A) Vertical packaged air conditioners. B) Packaged terminal air conditioners. C) Chillers. D) Rooftop packaged air conditioners.
Individual small scale turbines can, under the right conditions, generate between ____ kWh, depending on local wind speed, turbine size, and tower height.
A. 150 and 1500 B. 300 and 2000 C. 400 and 2500 D. 450 and 3000