How can you configure a default route?
What will be an ideal response?
When you connect a router to the Internet, as a practical matter, you cannot and would not want to enter all of the possible networks that are beyond your network. The table would be massive and difficult to maintain. Once you have the routing table set up to handle all of the networks that you care to configure, and you want all other packets to go to a specific location (usually a router that connects to the Internet), you can enter a default route for your router. When you do, all packets that are not defined specifically in your routing table will go to the specified interface for the default route. A default route is a type of static route that the administrator configures. Without a default route, all packets addressed to destinations on networks not specifically listed in the routing table will not reach their destinations. This is why most network administrators use a combination of dynamic routing protocols and static routes to maintain the routing tables on their routers. In the case of stub networks, very often only static routing is used. When IP routing is enabled, you can use the ip default-network command or the ip route 0.0.0.0 0.0.0.0 command to configure a default route.
You might also like to view...
Which of the following defines the C-string containing “Hello”?
A. ``` char stringVar[10] = “Hello”; ``` B. ``` char stringVar[10] = {‘H’, ‘e’, ‘l’, ‘l’, ‘o’}; ``` C. ``` char stringVar[10] = {‘H’, ‘e’, ‘l’, ‘l’, ‘o’, ‘\0’}; ``` D. ``` char stringVar[6] = “Hello”; ``` E. ``` char stringVar[] = “Hello”; ```
Suppose we wanted to use a bitwise AND on the variables x and y. The expression would look like this:
A. x && y B. x bitwise&& y C. x (&&) y D x & y
What is the output on PC1 when the ping command is issued?
What will be an ideal response?
A(n) _____________ is used to iterate through a collection and can remove elements from the collection during the iteration.
What will be an ideal response?