A circuit contains two inductors of 6.0 mH inductance in series placed in parallel with an inductor of 8.0 mH inductance. After one of the 6.0 mH inductors burns out, the repair person wants to replace all three inductors with one inductor of equivalent inductance. Assuming inductors combine in series and parallel the same way resistors do, what inductance should she use?
a. 3.0 mH
b. 3.4 mH
c. 4.8 mH
d. 11 mH
e. 20 mH
C
You might also like to view...
The Sun is a(n)
a. cluster. b. planet. c. star. d. galaxy.
If TiNi is deformed 5 % at a temperature above the martensite start temperature, and then the strain is fully recovered upon reduction of the stress to 0, this material is
(a) Super or pseudoelastic. (b) Anelastic. (c) Elastic. (d) Plastic.
A Bunsen burner is used to heat a block of steel. The surfaces of the steel may be taken as 50ºC except on the bottom, where the burner is heating the block. Figure 2-64 shows the overall configuration of the heating process. Using graphical techniques, estimate the temperature profile through the block and the heat transfer through the block.
The difference between speed and velocity is that
A) they are expressed in different units. B) velocity also includes a direction. C) velocity is the same as acceleration but speed is different. D) velocity is calculated using a physics equation.