Describe the tolerances required for use with undimensioned prints.
What will be an ideal response?
The features of the objects on an undimensioned drawing should be drawn with actual size and location tolerances of ±.010 in. (0.25 mm). The contour definitions on drawings, such as templates are provided to true profile. The tolerance of each grid line cell is ±.005 in. (0.13 mm) and the total grid tolerance is ±.010 in. (0.25 mm). The tolerance for the location of dimensional accuracy points is ±.010 in. (0.25 mm). The tolerance for the location of registration marks is ±.005 in. (0.13 mm).
You might also like to view...
Scientists now fully understand the process of genetic transfer
Indicate whether the statement is true or false
Technician A says that fuel subsystem charging system pressures may be as high as 250 psi in some fuel systems equipped with DPFs. Technician B says that fuel from the fuel subsystem is often required for SCR dosing. Who is correct?
A. Technician A only B. Technician B only C. Both A and B D. Neither A nor B
You can save time, resources, and energy when ____ electrodes are used for the entire weld because you can eliminate the need to grind the root pass.
A. E6011 B. E6012 C. E6014 D. E7018
Because liquids are non-compressible:
A) Their volumes will not change when pressures change. B) Their volumes change only when atmospheric pressure changes. C) The volume changes in relationship to pressure change when contained. D) They are not susceptible to changes in volumetric efficiency.