Evaluating performance and taking appropriate action is one step in the control process
After evaluation, one decision that may be appropriate is to
a. establish standards.
b. integrate control with planning.
c. establish feedback systems.
d. employ analytic and diagnostic skills.
e. do nothing.
E
You might also like to view...
A hydraulic cylinder is used to raise the bucket on a front-end loader. The output piston measures 1.8 inches in diameter. A pressure of 1,600 pounds per square inch (psi) is applied to the piston.
a. What is the area of the output piston to the nearest tenth of a square inch? b. What is force exerted by the piston tothecorrect number of significant digits?
A natural gas (methane, CH4) storage facility uses 3-cm-diameter by 6-m-long vent tubes on its storage tanks to keep the pressure in these tanks at atmospheric value. If the diffusion coefficient for methane in air is 0.2 × 10?4 m2/s and the temperature of the tank and environment is 300 K, the rate at which natural gas is lost from a tank through one vent tube is
(a) 13?×?10?5 kg/day (b) 3.2?×?10?5 kg/day (c) 8.7?×?10?5 kg/day (d) 5.3?×?10?5 kg/day (e) 0.12?×?10?5 kg/day
Explain the difference between Type FMC and Type AC or Type MC cable.
What will be an ideal response?
In a truck air brake system, which sub-circuit is primarily responsible for actuating front axle service brakes when the system is functioning normally?
A. primary circuit B. secondary circuit C. supply circuit D. wet circuit