Which potential problem must be overcome when interfacing TTL to CMOS?
A) The LOW output voltage may be too high. B) The HIGH output voltage may be too high.
C) The HIGH output voltage may be too low. D) The output current may not be sufficient.
C
You might also like to view...
After determining that voltage is available to the control circuit of a residential air-conditioning system, what four devices should be checked when troubleshooting the system?
What will be an ideal response?
If a Bragg angle of 41.31° is observed for the first order diffraction from the {110} planes, of body?centered cubic niobium using copper ?? 1 radiation ?=0.1541 nm, what is the interplanar spacing of the {110} planes?
What will be an ideal response?
Consider the phase-shifting circuit in Fig. 9.83. Let Vi = 120 V operating at 60 Hz. Find:
 FIGURE 1.png)
Rooftop units should be leveled when they are installed so that:
A) The oil will return to the compressor. B) The condensate can drain properly. C) The airflow will travel in the right direction through the evaporator. D) The refrigerant will travel through the system correctly.