The term ____________________ describes the union of two materials
Fill in the blank(s) with the appropriate word(s).
ANS: joint
You might also like to view...
Carry the answer to five decimal places. A carbon brush measures 
inch thick and 
inches wide.It is to have a copper plating on all sides 0.015 inch thick. What will be the finished thickness in decimal form of the brush with the copper plating?
Fill in the blank(s) with the appropriate word(s).
Historical load-bearing masonry structures were designed with the assumption that _________.
A) all wind loads on the building were resisted by exterior walls only, with no structural interaction between them. B) both interior and exterior walls resisted wind loads. C) interior and exterior walls and floor and roof diaphragms resisted wind loads collectively. D) all wind loads on the building were resisted by exterior walls only, and in doing so, they interacted with each other structurally. E) none of the above.
Regarding the gear train in question 22, what is the pitch diameter of the pinion if the gear has a 24 in. pitch diameter?
a. 96 in. b. 48 in. c. 6 in. d. 24 in.
If only one power door lock is inoperative, a possible cause is ________
A) Defective (open) circuit breaker for the power circuit B) Poor ground connection at the power door lock relay C) Defective door lock motor or solenoid D) Defective (open) fuse for the control circuit