Which of the following would indicate that the lube level in a differential carrier housing was acceptable?
A. oil level is exactly even with the bottom of the filler hole
B. lube level pours out the filler hole when the plug is removed
C. lube level is one knuckle joint below the filler hole
D. lube level is within two knuckle joints below the filler hole
Answer: A
You might also like to view...
The ____________________ starter is often referred to as the “simple” type. This starter has one set of contacts that close when the starter coil is energized. When the contacts close, the motor is connected directly to the line voltage.
Fill in the blank(s) with the appropriate word(s).
What is the percent saturation of water at sea level and 25ºC containing 9.8 mg/L of dissolved oxygen? Would you expect the dissolved oxygen level to increase or decrease, if the system were to move towards equilibrium?
What will be an ideal response?
When did central warm air systems for residential and commercial applications become well defined?
What will be an ideal response?
Features such as _____ cannot be shown clearly on an elevation view.
A. stairs B. floor heights C. foundation and footings D. interior walls