A driver of a vehicle equipped with a rack and pinion steering gear complains that the steering wheel jerks whenever the vehicle is being driven into a curbed driveway. Technician A says that the rack and pinion gears may have too little clearance between the teeth of the gears. Technician B says that a lack of lubrication of the rack and pinion is the most likely cause. Which technician is
correct?
A) Technician A only B) Technician B only
C) Both technicians A and B D) Neither technician A nor B
D
You might also like to view...
Gasketing materials and foam panels that are shipped with the curb are not part of the curb and should be discarded.
Answer the following statement true (T) or false (F)
Tire pressure sensors are attached to the rim by a sleeve nut on the ____.
A. axle B. side of the tire C. valve stems D. lug nuts
Stairs provide easy access between the floors of a building; one type, ____, traverse part of the distance between floors, usually half, in one direction and traverse the remaining distance in the opposite direction.
A. straight stairs B. L-shaped stairs C. double-L stairs D. U-shaped stairs
Which type of vehicles most often do NOT use metering valves?
A) All-wheel drive B) Four-wheel drive C) Rear-wheel drive D) Front-wheel drive