This geometric tolerance is a cross-sectional or single-line tolerance zone in the shape of two concentric circles.
a. concentricity
b. circularity
c. cylindricity
d. runout
b. circularity
You might also like to view...
____ are used to catch large items of waste material near the point of origin.
A. Interceptors B. Drainage filters C. Vent stacks D. Traps
Match the following weeds to their category
a. bull thistle c. crabgrass b. dandelion d. henbit 12. summer annual 13. perennial 14. winter annual 15. biennial
Two technicians are discussing disc brake rotor service. Technician A says that the inner races (bearing cups) should be removed from the rotor before it is mounted on the lathe. Technician B says that a non-directional finish on the rotor surfaces can be obtained by using sandpaper. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians A and B D) Neither technician A nor B
What is a general formula for calculating the effect of temperature on a holding charge?
A) New temperature/starting temperature × starting pressure B) Add or subtract the temperature difference from the starting pressure. C) P2 = P1 × delta T D) 4005 × square root of temperature difference