What test would you perform to make sure that the wheel bearing is not too tight?
What will be an ideal response?
To test a wheel bearing to see that it is not too tight, insert a screwdriver under the tabbed washer beneath the spindle nut and pry the washer up and down. There is enough slack between the washer and the spindle that it should move freely. If the washer is hard to move, the adjustment is too tight.
You might also like to view...
PROBLEM 2.4
A cast-iron tube is used to support a compressive load. Knowing that E = 69 GPa and that the maximum allowable change in length is 0.025%, determine (a) the maximum normal stress in the tube, (b) the minimum wall thickness for a load of 7.2 kN if the outside diameter of the tube is 50 mm.
Answer the following statement(s) true (T) or false (F)
Sixty pound (60#) felt covers more roof area per roll than 15# felt.
Convert 0.379 megavolts to volts
A) 0.000 379 volts B) 379,000 volts C) 379 volts D) None of these
When any refrigeration unit is in the heat mode of operation the flow of refrigerant is:
A. From the compressor discharge to the evaporator B. From the compressor discharge to the condenser C. From the compressor discharge to the heat exchanger D. From the compressor discharge to the accumulator