Which of these statements about overhead clearance is true?
a. If the road surface causes your vehicle to tilt toward objects at the edge of the road, you should drive close to the shoulder.
b. The weight of a vehicle changes its height.
c. You should assume posted clearance signs are correct.
d. Extra speed will cause air to push your vehicle down for extra clearance.
b. The weight of a vehicle changes its height.
You might also like to view...
A DMM set to read DC volts is connected across terminals 6 and 14 of the DLC. The meter reads zero volts at all times, key on or key off. This indicates ________
A) Bad UART output B) A CAN BUS shorted to ground C) A low temperature condition D) Headlights are OFF
Where underground service cables exit the trench and run up a utility pole to the transformer, the conductors must be protected from physical damage to a height of __________ feet above final grade.
a. 3 b. 8 c. 10 d. 12
What is output voltage at the end of the input pulse to an RC integrator if the resistance is 10 k?, the capacitance is 100 ?F and the input is a 50 V, 10 s pulse?
A) 47.5 V B) 43.25 V C) 50 V D) 31.6 V
Name the four groups of alloys that stainless steels consist of.?
What will be an ideal response?