Refer to the figure above. When the switch is closed in the primary circuit,
1) voltage is established in the primary coil
2) a current is established in the primary coil
3) a magnetic field builds up around the primary coil
4) all of the above
and a voltage is induced in the secondary circuit principally because
5) of the voltage in the primary.
6) of the change of current in the primary.
7) the expanding magnetic field about the primary is sensed by the secondary.
Answer: 4, 7
You might also like to view...
Derive an expression for the heat transfer from a tapered fin having base of Y thickness, L length, ? thermal conductivity, h0 convective coefficient, and T0 base temperature. The surrounding fluid temperature is T? .
What will be an ideal response?
A wheel (radius = 0.20 m) starts from rest and rotates with a constant angular acceleration of 2.0 rad/s2 . At the instant when the angular velocity is equal to 1.2 rad/s, what is the magnitude of the total linear acceleration of a point on the rim of the wheel?
a. 0.40 m/s2 b. 0.29 m/s2 c. 0.69 m/s2 d. 0.49 m/s2 e. 0.35 m/s2
For the following balanced reaction, which of the following is a gas?
2 Na(l) + Cl2(g) ? 2 NaCl(s) A) Na B) 2 Na C) Cl2 D) Cl E) NaCl
Thin Films: A thin uniform film of oil that can be varied in thickness covers a sheet of glass of refractive index 1.52. The refractive index of the oil is 1.64. Light of wavelength 555 nm is shone from air at normal incidence on the film. Starting with no oil on the glass, you gradually increase the thickness of the oil film until the first interference maximum in the reflected light occurs. What is the thickness of the oil film at that instant?
A. 139 nm B. 169 nm C. 183 nm D. 84.6 nm E. 91.3 nm