Briefly differentiate between engineering drawings and shop drawings by stating the ways these drawings are utilized.
What will be an ideal response?
Engineering drawings are used to provide general information for sales, marketing, engineering, and erection purposes. Shop drawings are used to provide more detailed information for fabrication purposes.
You might also like to view...
The heat input to the Brayton cycle is nearest:
The pressure and temperature at the inlet to the ideal Brayton cycle shown, are 100 kPa and 10ºC. It has a compression ratio of 8. The maximum temperature in the cycle is 1000ºC. Assume constant specific heats from Table B-2 for all
calculations.
A) 800 kJ/kg
B) 760 kJ/kg
C) 720 kJ/kg
D) 680 kJ/kg
Irrigation of a saline-sodic soil with water very low in salts could lead to the formation of a sodic soil
Indicate whether the statement is true or false
Open motor winding failures can be identified by:
A) Infinite resistance reading. B) Measurable resistance reading. C) Zero resistance reading. D) All of the above.
List seven benefits of using a control chart.
What will be an ideal response?