Answer the following statement(s) true (T) or false (F)
1. All motor circuits are protected for both overcurrent and overload conditions.
2. Overcurrent is a low intensity fault current condition caused by accidental short-circuits and ground-faults.
3. Overload is a lower intensity current condition caused by a mechanical overload on the motor.
4. Overload protection is provided before the contactor unit and after the motor being protected.
5. The overload unit controls the normally closed set of overload contacts, which are connected in the control circuit.
1. TRUE
2. FALSE
3. TRUE
4. FALSE
5. TRUE
You might also like to view...
Soft metal gaskets are used for _____ pipelines.
a. water b. caustic chemical c. steam d. oil and gas
________ the time base setting reduces the number of samples per second
A) Dividing B) Increasing C) Decreasing D) None of these
Wye-delta starting is accomplished by connecting the motor stator windings in wye, or star, during the starting period and then reconnecting them in delta during the run period.
Answer the following statement true (T) or false (F)
Which of the following is the most common type of fixture?
A. plate fixture B. angle plate fixture C. vise jaw fixture D. indexing fixture