The typical MAF reading on a scan tool with the engine at idle speed and normal operating temperature is ________
A) 14 to 24 grams per second B) 8 to 12 grams per second
C) 1 to 3 grams per second D) 3 to 7 grams per second
D
You might also like to view...
The primary purpose of a ____ is to show how the parts fit or operate together.
A. mated section B. mated assembly C. phantom assembly D. phantom section
How many complete bushings each 11.30 millimeters long can be cut from a bar of bronze that is 431.25 millimeters long? Allow 1.89 millimeters waste for each piece.
A. 28 B. 32 C. 36 D. 38
Brake lamp bulb replacement is being discussed. Technician A says some taillamp and stop lamp bulbs can be replaced without removing the lens assembly. Technician B says on some vehicles, the complete taillamp lens assembly must be removed for access to the bulbs. Who is correct?
A. A only B. B only C. Both A and B D. Neither A nor B
____________________ are found by adding the sum of the units and then dividing by the number of units.
Fill in the blank(s) with the appropriate word(s).