Describe the practice for representing a sheet metal part in a flat pattern using rectangular coordinate dimensioning without dimension lines and tabular dimensioning.
What will be an ideal response?
A common method for representing a sheet metal part is only the flat pattern using rectangular coordinate dimensioning without dimension lines and identify features with letters on the flat pattern. A table correlates with the letters on the flat pattern and specifies the dimensions of each labeled feature. The flat pattern dimensions take into consideration material bending so the final bent part is exactly as designed. For example, a flat pattern drawing of a sheet metal part dimensioned using rectangular coordinate dimensioning without dimension lines. In this example, the features are dimensioned in a table that correlates to letters on the flat pattern.
You might also like to view...
What should be done with a set of main and rod cap bearings on removal from an engine?
A. dispose of in scrap metal container B. tag by location for inspection C. crossover to next oversize value D. store in a sealed container
A state diagram is
A) a diagram showing different inputs and outputs. B) the same as a schematic. C) a map. D) a truth table.
One technique for improving efficiency and comfort through compressor selection is to select a:
A) Compressor with 25% greater capacity than the maximum anticipated refrigeration load. B) Compressor with capacity control to match the compressor capacity with the refrigeration load. C) Compressor that is designed for a colder evaporator temperature to achieve lower evaporator pressure and increased efficiency. D) Compressor with a capacity equal to the minimum anticipated refrigeration load.
ASE-Style Multiple Choice ____ occur when gravity produces a mass slippage of an overwet and thick paint film.
A. Paint color mismatches B. Machine compounds C. Paint runs D. Paint fish-eyes