A plugged dishwasher sink with the dimensions of 2 ft × 1.5 ft × 1 ft is being filled with water from a faucet with an inner diameter of 1 in. If it takes 40 seconds to fill the sink to its rim, estimate the volumetric flow of water coming out of the faucet. What is the average velocity of water coming out of the faucet?

What will be an ideal response?


Assume constant water density.

Trades & Technology

You might also like to view...

Draw each line shown in Figure 2–7. Print or plot your drawing.

Follow the specific instructions to complete each problem. What will be an ideal response?

Trades & Technology

In a series circuit _______

A) Current flow is constant at any point in the circuit B) Total circuit resistance is equal to the sum of all resistances in the circuit C) Both A and B D) Neither A nor B

Trades & Technology

Two unskilled part handlers load forms into a fixture in a robot molding work cell and unload the finished product every twenty minutes. The robot is in the pause mode will they work. The robot is in the pause mode will they work. The probability of injury is __________

A) Certain B) Probable C) Unlikely D) Possible

Trades & Technology

In order to reduce the number of pins on high capacity DRAM chips, address ________ is used so that a single pin can accommodate two different address bits

Fill in the blank(s) with correct word

Trades & Technology