A field weld is one of the six major types of welds.
Answer the following statement true (T) or false (F)
False
You might also like to view...
How much work is needed to lift a 310 lbm rock a distance of 25.0 ft, where the acceleration due to gravity is 32.16 ft/s2?
Given: m = 310 lbm; ?x = 25.0 ft; g = 32.16 ft/s2 What will be an ideal response?
When welds are given in lengths spaced a given distance apart, the length of each weld increment is known as:
a. length b. increment c. pitch d. distance
If a joint is to have a 1/2" fillet welds 3" long with 12" weld pitch, what will the welding symbol be?
A. The rectangular fillet welding symbol has a notation of 1/2 on the left side of the triangle, and a notation of 312 on the right side of the triangle. B. The triangular fillet welding symbol has a notation of 1/2 on the left side of the triangle, and a notation of 3-12 on the right side of the triangle. C. The triangular fillet welding symbol has a notation of 1/2 on the right side of the triangle, and a notation of 312 on the left side of the triangle. D. The triangular fillet welding symbol has a notation of 1/2 on the left side of the triangle, and a notation of 312 on the right side of the triangle. E. none of the above
The condensate drain on a rooftop unit:
A) Does not require a trap because of the short distance. B) Does not require any type of drain line. C) Must include a trap unless the unit has an integral trap. D) Is normally run through the curb to an inside drain connection.