Raising the turn signal mounted dimmer lever activates the high beams on most vehicles. This feature, called ____________________, works when the headlights are off as well as when the dimmer switch closes the circuit to the high beams.
Fill in the blank(s) with the appropriate word(s).
flash to pass
You might also like to view...
Sketch end views of the following weld joints in the spaces provided.
1. Square groove butt joint 2. Single bevel butt joint 3. V-groove butt joint 4. J-groove butt joint 5. U-groove butt joint
According to the National Electrical Code®, bell wires must not come closer than ____________________ inches to open lighting or power conductors unless the bell wires are permanently separated from the lighting or power conductors by some approved type of insulation in addition to the insulation on the wire.
Fill in the blank(s) with the appropriate word(s).
The ____ option of the diff command is used to display the differences side-by-side in columns.
A. -s B. -c C. -n D. -y
With regard to transistor operation, VCC is
A) the dc voltage measured across the collector and base terminals B) the collector supply voltage C) the emitter supply voltage D) the dc voltage measured across the base and emitter terminals