Using the Table of Block Thicknesses for a Metric Gage Block Set, determine a combination of gage blocks for a dimension of 44.723 mm.

What will be an ideal response?


1.003 + 1.02 + 1.7 + 1 + 40 = 44.723

Trades & Technology

You might also like to view...

The quality control department at Alexander Fasteners measured the length of 100 bolts randomly selected from a specified order. The mean length was found to be 7.25 cm, and the standard deviation was 0.01 cm. If the bolt lengths are normally distributed, find

(a) The percentage of bolts shorter than 7.24 cm (b) The percentage of bolts longer than 7.28 cm (c) The percentage of bolts that meet the length specification of 7.25 ± 0.02 cm (d) The percentage of bolts that are longer than the nominal length of 7.25 cm

Trades & Technology

Which of the following are not incentives for corporate entrepreneurs?

A. Significant degree of autonomy B. Effective rewards like stock or bonuses C. A culture that decries individual initiative D. Slack time for exploring not-yet-approved projects

Trades & Technology

The rhododendron, azalea, and Japanese Andromeda require soil with a pH _____

A) 7.0 or above B) from about 5.0 to 6.0 C) of 3.0 to 3.5 D) under 3.0

Trades & Technology

This is the first step in trouble shooting a starting system complaint:

a. check battery voltage b. listen for the solenoid clicking c. check starter current draw d. verify the complaint

Trades & Technology